..::: Supliaereos Pneumatic Filters Rapco Inc :::..

Pneumatic filters

FAA-PMA approved replacements for airborne assemblies

Recommended Replacement Times:

Vacuum Instrument Central Gyro Filters:

Replace at least every 200 flight hours or annually, whichever comes first, to protect gyros.

Vacuum Relief and Pump Inlet Foam Garter Filters:

Replace at least every 100 flight hours to protect the relief valve seat and vacuum pump.

Pressure / Vacuum System Inlet Filters:

Replace at least every 200 flight hours or annually, whichever comes first.

Inline Filters for Pressure Systems:

Replace at least every 200 flight hours or at pump change to provide a supply of filtered air to the system components

	RA1J7-1	Vacuum Instrument Central Gyro Air Filter: 0.3 Micron pleated paper element with two 3/8” installtion tubes.
	RAB3-5-1	Vacuum Relief & Pump Inlet Foam Garter Filter: Foam Polyurethane Garter filter. Fits all Airborne Series 133 & 2H3 Regulating Valves.
	RAD9-14-5	Replacement element used in Airborne 1J2 Series Inlet Filter Except 1J2-2.
	RAD9-14-3	Replacement element used in Airborne 1J2-2 Inlet Filter.
	RAD9-18-1	Replacement element used in RAPCO 1J7-1 Vacuum Instrument Central Gyro Air Filter Assembly.
	RA1J4-4	Line Mounted Filter - 1/2” x 1/2” beaded tube. Overall length 5 3/4” long.
	RA1J4-6	Line Mounted Filter - 5/8” x 5/8” beaded tube. Overall length 6 3/4” long.
	RA1J4-7	Line Mounted Filter - 5/8” x 5/8” beaded tube. Overall length 5 1/2” long.
	RA1J10-1	Line Mounted Filter - 3/8” x 3/8” non-beaded tube. Overall length 5 3/4” long.

Interchangeability Chart

Suplidores Aeronáuticos S.A. Calle 51 # 71A-19
Tels: (571) 263 1384 - 263 7371 Fax: (571) 295 9643
Bogota D.C. - Colombia